Live Chat
Available 24/7
The PRO-WELL-1E backwashes automatically and the PRO-S-80E regenerates automatically on their programmed schedules. T...
Use a water hardness test kit to compare untreated water with treated water. That is the recommended way to tell when...
Use the regeneration instructions from the WS-P-16 manual PDF: https://cdn.shopify.com/s/files/1/0281/0845/6039/files...
Yes, the interval can be changed from 24 to 940 hours, but 72 hours has been the most effective setting for preventin...
Direct the customer to hi@proaquawater.com for model-specific cleaning guidance.
Every 3 months.
With the WS-P-REG-KIT, use 26 oz of non-iodized table salt. Without the kit, use 4 lbs of non-iodized salt.
A small pressure drop is normal through the control valve. The actual drop depends on plumbing configuration and flow...
Yes. The water level changes based on the amount of salt in the tank, but it should generally be 2 to 5 inches above ...
No. The FC-10-ALK is a 10" filter and is too small for the PRO-100-E.
The unit is generally self-sustaining and does not usually need regular external maintenance beyond proper programmin...
The default schedule is every 72 hours, usually at 2:00 AM. Frequency can be adjusted based on water quality and usage.
It means the gallon capacity has been exhausted and the system is counting down to its scheduled regeneration time.
ProAqua recommends setting them to different times so both units get proper water volume during their cycles.
Most filters should be replaced every 6 to 12 months, with some pre-filters needing more frequent service depending o...
Available 24/7
800-980-3335
Mon - Fri | 8:00am - 4:00pm PST
hi@proaquawater.com
We'll get back to you ASAP