Admin
- Total activity 45
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 0
Articles
Recent activity by Admin-
What is the WS-P-REG-KIT used for?
It works as both a portable brine tank during regeneration and a filter housing during service.
-
What media is prefilled in the PRO-WELL-1E?
1 cubic foot of light manganese dioxide media.
-
Which ProAqua systems clean themselves automatically?
The PRO-WELL-1E backwashes automatically and the PRO-S-80E regenerates automatically on their programmed schedules. This answer does not apply to every ProAqua product.
-
How can I tell when the WS-P-16 needs regeneration?
Use a water hardness test kit to compare untreated water with treated water. That is the recommended way to tell when the resin is exhausted.
-
How do I regenerate the WS-P-16?
Use the regeneration instructions from the WS-P-16 manual PDF: https://cdn.shopify.com/s/files/1/0281/0845/6039/files/WS-P-16_Instr_06-23_LR_270971f4-9b11-4bec-9153-800f80e079ef.pdf?v=1706895313. A...
-
Can the PRO-WELL-1E backwash interval be set longer than 3 days?
Yes, the interval can be changed from 24 to 940 hours, but 72 hours has been the most effective setting for preventing media fouling.
-
How do I clean or sanitize the WS-P-16?
Direct the customer to hi@proaquawater.com for model-specific cleaning guidance.
-
How often should I replace the WS-P-16 pre-filter?
Every 3 months.
-
How much salt does the WS-P-16 use during regeneration?
With the WS-P-REG-KIT, use 26 oz of non-iodized table salt. Without the kit, use 4 lbs of non-iodized salt.
-
What is the PSI drop from the control head?
A small pressure drop is normal through the control valve. The actual drop depends on plumbing configuration and flow rate.