Admin
- Total activity 45
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 0
Articles
Recent activity by Admin-
Can I install the unit without the included bypass and use my own?
A customer can use a separate 3-valve bypass, but ProAqua recommends the included manufacturer bypass because it is the intended fit, seals correctly, and makes future servicing easier.
-
What are the electrical requirements for the PRO-RO series?
PRO-RO-I uses 120V. PRO-RO-II and PRO-RO-IV use 220V.
-
What prefiltration does the PRO-RO series require?
Proper pretreatment is critical. A standard setup is staged sediment pre-filtration such as 20 micron followed by 5 micron, carbon filtration for chlorine or chloramines, a water softener when hard...
-
How many cubic feet of resin are inside the PRO-S-80E?
2.5 cubic feet
-
What comes with the water softener system?
The system includes the components shown in the product listing photos and described in the "What's Included" section on the product page.
-
Is there a way to make soft water feel less slippery?
Close the bypass gradually to blend treated and untreated water until the desired feel is reached.
-
What should the gauges read on the 3-stage system?
The gauges show the incoming line pressure across all three stages.
-
Can well water filtration help with hard water?
Filtration can remove contaminants, but it does not soften water. Hard water requires a softener or conditioner to reduce calcium and magnesium.
-
Do I need a water test before buying a system?
Yes. A water test helps identify the contaminants present and is the safest way to recommend the correct filtration setup.
-
What does a well water filtration system remove?
Depending on the system and water conditions, a well water setup can address iron, sediment, sulfur, manganese, bacteria, and other groundwater contaminants.